Thursday, March 24, 2011

Polo Shirt Neckline Placket

 

Okay, let’s try this again…

IMG_2234
The Book says, “A polo shirt placket is usually used on rugby-type knit shirts.”  It goes on to say it’s similar to the continuous sleeve placket, and is “wider to accommodate buttons and buttonholes.”

Okay, first up, prepare your neckline by cutting an opening.  It looks like I cut a V-shape, but really I just cut a straight slit.  The knit just opened up like this.  Also, I found it helpful to stay stitch across the bottom of the slit, as the knit kept stretching for me as I worked with it.

IMG_2197 - Copy
You’ll also need two facing pieces.  One needs to be wider than the other, as it will become the placket as well as a facing.  They should be about 1/2 inch longer than the neckline opening. 
IMG_2198 - Copy
Lay them, right sides facing, on the garment.  Match the straight edges of the facings with the neckline opening/slit.  And just pretend that facing on the left doesn’t have a chunk out of it.  I was working with scraps. 
IMG_2199
Sew 1/4 inch seam allowance along the straight edge of each facing.  Only sew the length of the opening, leaving the last 1/2 inch of the facings unsewn
IMG_2200 - Copy
Flip the extended facing over at the seam line
IMG_2201
And begin to pin your collar.  The collar should be pinned at the center of what will become the placket on the facing.IMG_2202
This is where I was originally confused, so I’ll try to explain it as best I can.  Where you just placed that pin/collar is the halfway point of the placket.  So now you need to fold the facing over, with the fold line at the place where the placket will be.  So if you’re making a one-inch placket, the pin will be 1/2 inch into the placket area, and the fold line 1/2 inch over from that.  Fold the facing back to the wrong back so the wrong side is facing up again, and the placket is the fold line, NOT the seam (I know obvious, but it took me far too long to realize this…)


IMG_2205 - CopyIMG_2206 - Copy


Now fold the other facing over at the seam.

IMG_2207 - Copy
And pin the other end of the collar about 3/4 inch away from the neckline (seam)
IMG_2208
Flip the facing back over the pinned collar.  Finish pinning the collar all around the neckline, pulling the facing edges up to match and get pinned, too


IMG_2210IMG_2211


Sew all around the collar, catching all layers of fabric

IMG_2212
Turn the facings right side out and into the inside of the shirt


IMG_2213IMG_2215


Press
IMG_2216
Stitch along the bottom of the neckline opening, catching the ends of the facings and securing those in place, as well
IMG_2217
Top stitch as desired
IMG_2218

See, that wasn’t so bad now, was it?!

3 comments:

Reno said...

Not bad at all! Nice placket.

craftedbymama said...

wow, I am amazed. I sure would like to try that, but I think I might be to scared...I love the fabric

amy
craftedbymama.blogspot.com

SAMZE said...

OMG!!!! you are freaking amaaaazing! how fantastic are those shirts? you have some made skills! love the shirts. how do you find the time to do all this? i had week off and i still only managed to sew 1 1/2 bags, a simple turn and stop stitch baby blanket, and part of one hula pa`u (skirt). it takes me soooooo long to cut and lay out fabric. i love sewing, but really don't enjoy laying out and cutting fabric. how do you do it all? i mean to even come up with your patterns! i love it! :) so inspirirng! i have added these shirts to my "to do" list!

Related Posts with Thumbnails
 
Creative Commons License
Sew a Straight Line by Sabra Gubler is licensed under a Creative Commons Attribution 3.0 United States License.
Based on a work at http://sewastraightline.blogspot.com.
Permissions beyond the scope of this license may be available at sewastraightline@gmail.com. 01 10